Identification and quantification of anthocyanins in different coloured cultivars of ornamental kale (Brassica oleracea L. var. acephala DC)

Anthocyanins are responsible for the colour of many fruits, vegetables, flowers, and coloured-leaved trees. Ornamental kale (Brassica oleracea L. var. acephala DC) is widely cultivated for its colourful inner leaves. To investigate the relationship between the degree of colouration and anthocyanin distribution, content, and composition in ornamental kale, the authors studied the pigment characteristics of five cultivars with different coloured leaves (white, pink, red, purple, and purple-black). Microscopy observation, spectrophotometer, and high-performance liquid chromatography-mass spectrometry (HPLC-MS) analysis of fresh inner leaves revealed that pink, red, and purple colourations were associated with high levels of anthocyanin, while purple-black was the result of the combination of anthocyanins and chlorophyll. In the coloured cultivars, anthocyanins were abundant mainly in the first and second cell layers below the epidermis in both the hypocotyls and inner leaves. No anthocyanin was found in the white-leaved phenotype cultivar. Anthocyanin content increased as leaf colour deepened from pink, red, to purple cultivars, which had little chlorophyll and carotenoid. The authors identified eight anthocyanins in the four coloured cultivars, including one non-acylated, four monoacylated, and three diacylated cyanidin glycosides. Cyanidin-3-(sinapoyl)(feruloyl)-diglucoside-5-glucoside was the most abundant anthocyanin in the four coloured cultivars followed by cyanidin-3-(sinapoyl)-diglucoside-5-glucoside. The analysis of anthocyanin accumulation characterisation provides important information on evaluating colouration patterns in coloured plants, and will be helpful for breeding desired leaf colours in ornamental kale.     

日光温室新型装配式骨架节点设计与有限元分析

为实现日光温室骨架的装配化,把控安装质量,提高温室骨架受力性能,设计完成了日光温室新型装配式骨架及装配式节点,以期为装配式日光温室提供新的研究思路.利用ANSYS Workbench软件建模辅助分析,比选外套管和内插管2种装配方式,在逐级均布荷载作用下主管和套管所受应力、剪力及弯矩情况;用Workbench软件分析装配式骨架在最不利荷载作用下轴向应力、剪力、弯矩及变形情况.结果 表明:骨架在外套管的装配方式下,主管及套管自身所受的轴向应力和弯矩更小,安全性更高.用外套管装配的三段桁架在最不利荷载组合作用下,最大轴向应力17.35MPa,最大变形量为0.26 mm,套管最大轴向应力5.0 MPa,最大剪力2345.3 N,最大弯矩为41.3N·m.该日光温室新型装配式骨架及装配式节点安全、稳定、变形量小,可推广使用.     

武夷岩茶种质资源遗传多样性与亲缘关系的SRAP分析

本研究利用SRAP-PCR反应体系,从88对SRAP引物组合中筛选出43对引物组合,对武夷岩茶主要的30份种质资源进行SRAP分析,共扩增出385条带,其中具有多态性的有236条带,占总数的61.30%,表明30份武夷岩茶种质呈现一定的遗传多样性。武夷岩茶种质资源间遗传距离变幅在0.31~0.98之间,平均为0.63,基于SRAP标记利用系统聚类法把武夷岩茶分为三大类,为武夷岩茶遗传研究、品种选育与资源保护提供参考。     

不利气象条件对果业生产的影响及果园管理建议

针对近年来不利气象条件频发情况,分析了不利气象条件对果业生产的影响,提出减轻不利气象条件对果树影响的建议和不利气象发生后果园的管理要点。     

钾肥和硅肥对油用亚麻茎秆抗倒伏特性的影响

为了优化油用亚麻抗倒伏的肥料运筹措施,以‘陇亚11号’和‘定亚23号’为试验材料,通过裂区设计,研究了钾肥（不施钾、52.5 kg K₂O/hm²和105 kg K₂O /hm² 3个水平）和硅肥（不施硅和90 kg SiO₂/hm² 2个水平）用量对油用亚麻茎秆形态学、力学抗倒伏特性及产量的影响。结果表明：‘陇亚11号’的株高、重心高度及茎粗、壁厚、抗折力均显著大于‘定亚23号’,茎秆形态学及力学抗倒伏特性的综合影响下,‘陇亚11号’较‘定亚23号’倒伏率提高21.24%而产量降低9.43%。钾肥显著改善了抗倒的茎秆表观形态学特性,施钾后茎粗、壁厚、茎秆抗折力、抗倒伏指数提高而株高和重心高度降低,千粒重和籽粒产量分别提高7.35%和9.34%。硅肥对茎秆形态学、力学特性及籽粒产量均无主效应,但硅肥与钾肥的互作使茎粗显著增加。抗倒伏指数与茎粗、壁厚呈显著正相关,与株高、重心高度呈显著负相关。品种间的茎秆抗倒伏特性差异较大,施用钾肥显著改善了抗倒的茎秆表观形态学特性,优化了茎秆机械性能,增强了油用亚麻的抗倒伏能力;供钾量较低时,硅肥与钾肥对茎粗的互作正效应明显。     

我国国家公园与自然保护地法律制度衔接研究

我国既有的各类自然保护地存在空间交叉重叠、权责模糊、多头管理等突出问题，成为制约我国生态文明建设的体制难题。建立以国家公园为主体的自然保护地体系，正是国家破解这一难题的制度举措。文中在介绍国家公园与自然保护地概念、分析我国自然保护地现有法律制度存在主要问题的基础上，提出了国家公园与自然保护地法律制度衔接的设想。在国家公园体制建设的过程中，理顺国家公园与既有自然保护地之间的关系，加强国家公园与自然保护地法律制度的衔接显得尤为重要。具体思路为:在宏观政策法律层面，从国家统一立法、提升立法协调性、扩大公众参与等方面提出国家公园体制法律建构的整体设想；在微观制度保障层面，吸纳保护原则、差异原则及衔接原则，建立国家统一自然保护地管理制度。建议以《国家公园法》的制定为契机，统筹考量制定符合我国国情的统领自然空间保护的基本法——《自然保护地法》。     

有机肥对土壤特性及农产品产量和品质影响研究进展

施用有机肥是农业生产的重要措施,对绿色农业发展起到积极作用,而且越来越广泛施用。本文介绍了目前有机肥基本概况,重点综述了有机肥对提高土壤肥力、提高作物产量和品质、促进养分利用以及对病虫害发生影响等方面研究的最新进展,分析了当前有机肥施用对耕地质量和农产品安全风险、施肥效率低、以及有机肥品种研发不足、相关质量标准滞后等问题,并对当前有机肥推广应用的形势和发展前景进行了分析和展望。     

增温加氮对两种不同来源加拿大一枝黄花子一代生长的影响

为探讨模拟气候变暖(增温2℃)和大气氮沉降(4 g·m-2·a-1)对入侵植物子代生长的影响,以中国和北美两种来源的加拿大一枝黄花子一代为研究对象,研究了子一代幼苗的生长和生物量分配的响应.结果表明:(1)增温降低中国来源加拿大一枝黄花的地上生物量,但提高其根冠比,增温降低北美来源加拿大一枝黄花的根冠比;(2)与北美来源加拿大一枝黄花相比,加氮对中国来源加拿大一枝黄花叶片数、地下生物量和总生物量的促进作用更大;(3)加氮促进加拿大一枝黄花地上生物量、地下生物量和总生物量的积累,但增温减缓了这种促进作用.这些结果表明,气候变暖可能会部分抵消氮沉降对加拿大一枝黄花子一代幼苗生长的促进作用.     

Spatial–temporal evolution of the port–hinterland relationship: A case study of the Midstream Yangtze River,China

Most scientific attention on port studies centers on deep sea ports, especially container ports. In this paper, in contrast, attention is focused on the spatial–temporal development of inland waterway ports on the Midstream Yangtze River from 2001 to 2013. The aim of this study is to assess two relevant and complementary questions of the hinterland evolution: its geographical extent and the coordination relationship with the inland port. To conduct the study, it was necessary to first identify the boundaries of the ports' hinterlands within the given timeframe. Then, the coupling coordination degree model was introduced to explore the underlying relationship between the port service and hinterland economy. Furthermore, to better depict the intricate economic characteristics of the hinterland, the development stage theory was applied in the models. The results highlight the emergence of a discontinuous hinterland at Wuhan Port and its reinforcement of primacy with respect to fierce hinterland rivalry. It also demonstrates that an interplay between major ports and their corresponding hinterlands evolves from the transitional stage, characterized by lagging port service, to the multi‐stage, wherein the supply of ports partly outstrips hinterland demand.